Directions For Use

INSTRUCTION FOR USING NOMA 230 – EXTERIOR TEXTURED PLASTIC RESTORER

noma — xịt dưỡng nhựa nhám

Faded exterior plastic trims can make a vehicle look older and less well-maintained. NOMA 230 helps restore the natural dark finish of exterior textured plastic and adds a protective layer for daily driving conditions.

PRODUCT INTRODUCTION

NOMA 230 is an aerosol spray designed for exterior textured plastic surfaces. It helps restore a natural matte-black finish, reduce dullness, and protect plastic trims against UV exposure, oxidation, ozone, and everyday environmental impact when used correctly.

BENEFITS

  • NOMA 230 offers the following key benefits:
  • Helps restore the natural black appearance of exterior textured plastic.
  • Provides a matte finish without an oily or fake-gloss look.
  • Helps protect plastic surfaces against UV exposure and oxidation.
  • Helps reduce static dust buildup on treated plastic surfaces.
  • Suitable for large exterior plastic areas such as bumpers, side claddings, fender trims, step boards, and black plastic trims.
  • Aerosol spray format helps cover large areas faster and more evenly.
  • Helps maintain the appearance of exterior plastic for approximately 60–90 days depending on parking and weather conditions.

DETAILED INSTRUCTIONS

  • Step 1: Clean off dust and dirt, then dry the plastic surface completely before use.
  • Step 2: Shake the NOMA 230 bottle well before use.
  • Step 3: Spray a moderate amount from about 20–25 cm away from the surface.
  • Step 4: Use a clean cloth to wipe and spread the solution evenly.
  • Step 5: For dirty or faded areas, wipe more thoroughly with moderate pressure to help the product cover the surface evenly.
  • Step 6: Allow the surface to dry naturally after wiping.

APPLICATION NOTES BY SURFACE

  • For exterior bumpers: Clean thoroughly before spraying. Apply a thin, even layer and wipe in one direction with a microfiber towel.
  • For side claddings and fender trims: Spray section by section to avoid uneven coverage. Spread immediately after spraying.
  • For step boards and lower plastic trims: Clean off mud and road dirt carefully before application. Make sure the surface is fully dry before spraying.
  • For small black plastic details: Spray onto a microfiber towel first, then wipe the plastic detail. This helps control the amount of product and reduces overspray.
  • For areas close to paint or glass: Mask surrounding areas before spraying, or spray onto a towel first and apply manually.

USAGE NOTES

  • Use only on exterior textured plastic surfaces.
  • Do not use on car paint, glass, mirrors, clear plastic lenses, screens, tires, brake parts, pedals, steering wheels, seats, or areas that may become slippery.
  • Do not apply to hot surfaces or under direct sunlight.
  • Do not spray directly onto sensors, cameras, lights, electrical connectors, or charging ports.
  • Do not over-apply. A thin and even layer gives a cleaner matte finish.
  • Wipe away excess product after application to avoid streaking or dust attraction.
  • Avoid water, rain, or car washing for 2–4 hours after use.
  • Effectiveness depends on the initial condition of the plastic, parking environment, weather exposure, and washing frequency.
  • Expected duration: approximately 60–90 days for vehicles parked under shade or in a garage, and approximately 45–60 days for vehicles frequently parked outdoors.

Important: NOMA 230 helps restore and protect exterior textured plastic surfaces. It does not repair cracked plastic, broken trims, deep scratches, peeling surfaces, or permanent structural damage.

SAFETY PRECAUTIONS

  1. Use only in a well-ventilated area. This aerosol is flammable.
  2. Keep away from heat, sparks, open flames, cigarettes, hot surfaces, running engines, exhaust systems, and electrical sparks. Do not smoke during use.
  3. Do not puncture, crush, or burn the can, even when empty.
  4. Avoid inhaling spray mist or vapors and contact with skin or eyes. Protective gloves are recommended.
  5. Keep out of reach of children and pets. Do not use near children.
  6. If the product contacts skin, wash with soap and water. If it contacts eyes, rinse carefully with clean water for several minutes and seek medical advice if irritation continues.
  7. If swallowed, seek medical help immediately.
  8. Absorb leaks or spills with paper or suitable material and dispose of them according to local regulations.

STORAGE INSTRUCTIONS

  • Temperature: Store in a cool, dry place between 15–30°C.
  • Heat: Keep away from direct sunlight, high temperatures, sparks, flames, and heat sources.
  • Position: Store upright in a stable place.
  • Pressure: Do not puncture, crush, or burn the can.
  • Cap: Keep the nozzle clean and close the cap after use.
  • Safety: Keep out of reach of children and pets.
  • Vehicle Storage: Do not store inside a vehicle exposed to direct sunlight or high heat for long periods.

FREQUENTLY ASKED QUESTIONS (FAQ)

1. What is the difference between NOMA 230 and NOMA 250?

NOMA 250 is a 30ml dropper product suitable for smaller plastic details and interior plastic areas. NOMA 230 is a 450ml aerosol spray designed for larger exterior textured plastic areas such as bumpers, side claddings, and exterior black trims.

2. Does NOMA 230 leave an oily or fake-gloss finish?

No. When applied correctly in a thin and even layer, NOMA 230 gives a natural matte-black finish without an oily or fake-gloss appearance.

3. Can NOMA 230 be used on car paint or glass?

No. NOMA 230 is designed for exterior textured plastic only. Avoid spraying onto paint, glass, mirrors, lights, sensors, or other surrounding surfaces. Mask nearby areas or spray onto a towel first for better control.

4. How long does the effect last?

The effect usually lasts around 60–90 days for vehicles parked under shade or in a garage. For vehicles frequently parked outdoors, the effect may last around 45–60 days depending on weather, washing frequency, and plastic condition.

5. Can NOMA 230 restore cracked or damaged plastic?

No. NOMA 230 helps restore color and protect the surface of exterior textured plastic. It does not repair cracked plastic, broken trims, deep scratches, peeling surfaces, or structural damage.

CONCLUSION

NOMA 230 is a practical exterior textured plastic restorer for vehicles with faded black trims, bumpers, claddings, and plastic details. Its aerosol format makes it convenient for larger areas, while the matte finish helps the vehicle look cleaner and better maintained.

For the best result, clean and dry the surface first, apply a thin even layer, wipe in one direction, avoid overspray, and keep the treated area away from water for the first 2–4 hours.

Leave a Reply

Your email address will not be published. Required fields are marked *