Directions For Use

INSTRUCTION FOR USING NOMA 890 – NANO COATING AGENT CAR POLISH

NOMA 890

INSTRUCTION FOR USING NOMA 890 – NANO COATING AGENT CAR POLISH

🧴 Product Introduction

Noma 890 Nano Coating Agent Car Polish is a multi-functional solution that delivers exceptional gloss and long-lasting protection for your vehicle’s paintwork.

Featuring a non-greasy, fast-restoring formula, the product is easy to apply, leaves no streaks, and performs effectively in various weather conditions across different vehicle types. Made with safe and environmentally friendly ingredients, Noma 890 provides durable paint protection without damaging the surface — offering real practical value for everyday car care.


🌟 Outstanding Features

  • Clear coat protection: Shields the paint surface from corrosion, light scratches, chemical stains, and UV rays — preserving the vehicle’s appearance for longer.

  • Easier car cleaning: The hydrophobic and dirt-resistant surface reduces washing time and effort.

  • Enhanced gloss & depth: Improves shine and color clarity for a premium finish.

  • Chemical & acid resistance: Helps minimize damage from acid rain, bird droppings, and saltwater exposure.

  • UV & oxidation protection: Prevents fading and reduces paint dullness over time.

  • Lotus-effect hydrophobic layer: Water beads and slides off easily, reducing dirt buildup and making maintenance simpler.


⚙️ Basic Instructions

  • Clean the vehicle’s paint surface thoroughly.

  • Shake the bottle gently before use.

  • Spray a moderate amount onto a clean microfiber cloth or directly onto the surface (hold 15–20 cm away and spray evenly).

  • Spread evenly with a soft cloth.

  • Allow to dry naturally for 5–10 minutes.


⚙️ Detailed Application Guide

  1. Wash the vehicle thoroughly to remove dust, mud, grease, and contaminants.

  2. If necessary, use a clay bar or tar remover to eliminate embedded contaminants or old wax layers.

  3. Dry the surface completely. Avoid applying under strong sunlight or on hot paint.

  4. Work in small sections (e.g., 1 m² or 2’x2’) for better control.

  5. Spray an appropriate amount onto the surface or microfiber applicator.

  6. Spread a thin, even layer across the area, ensuring full coverage.

  7. After a few minutes, buff with a clean, dry microfiber cloth to enhance gloss and remove excess product.

  8. Avoid direct sunlight and water contact for at least 4–24 hours to allow proper curing (e.g., avoid touching for 4 hours; avoid water for 24 hours).

  9. Once cured, wash normally using mild car shampoo. Avoid harsh chemicals or aggressive scrubbing.

  10. When hydrophobic performance or gloss noticeably decreases, reapply to maintain protection.

 


📦 Technical Specifications
  • Product name: Noma 890
  • Capacity: 300ml
  • Shelf life: 3 years from date of manufacture
  • Bottle form: Plastic spray bottle
  • Chemical Properties : Silicon Dioxide, Hydrocarbons, Polymer Sealant, Surfactant, Solvent
  • Solution : transparent, colorless
  • Accessory Set : Microfiber Towel
* Storage:
  • Storage temperature: 15-30 degrees Celsius (avoid direct sunlight)
  • Lighting: Avoid UV rays to cool and dry place
  • Bottle cap: Sealed after use
  • Water & moisture: Absolutely avoid getting into the bottle
* Time and effective use: (for internal reference)
  • About 3-6 months : if used frequently, harsh conditions, parked outdoors or not well maintained.
  • About 1 to 2 years: if the surface is carefully prepared, use good conditions: indoor car – underground – in the garage, reasonable maintenance, favorable environment.
* Service mode, after-sales for products:
  • 7 days warranty 1 change 1 when the product is broken, not intact during shipping to customers
Safety information for users:
  • Do not inhale the spray directly
  • Avoid skin and eye contact
  • Do not spray on the face, eyes, or near children.
  • Do not use near heat sources, sparks or ceiling flames
  • Do not smoke when using = > User health safety: Non-toxic if used correctly – avoid inhalation, swallowing, eye contact

 


💡 Note when using
  • It is best to do it when it is cool, avoid direct sunlight & hot paint.
  • Don t leave it too long or too dirty before coating the more standard the surface, the more durable the coating is.
  • If new or unstable paint is applied, wait for the paint to dry / finish before applying.
  • Do not use a hard-hitting pad or rub it after it has been coated – this can reduce effectiveness.
  • The time commitment is only under ideal conditions – if the car is parked outdoors, goes a lot, washes hard then the time will shorten.

Để lại một bình luận

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *