INSTRUCTIONS FOR USING NOMA 120 – INJECTOR CLEANER

🧴 Product Introduction

This product is a professional deep engine maintenance solution designed to clean clogged fuel systems and restore vehicle performance to like-new condition. Manufactured with precision and professionalism, it features an advanced formula that removes stubborn carbon deposits inside fuel injectors, combustion chambers, and intake valves, helping the engine run smoother and more powerfully.

With a smart bottle design that includes a convenient pouring spout, the product offers maximum ease of use, making at-home vehicle maintenance simple and clean.

🌟 Outstanding Benefits

• Comprehensive cleaning: Effectively removes dirt and carbon deposits from all types of fuel injectors (gasoline/diesel).

• Restores engine power: Eliminates blockages to ensure finer fuel atomization and more complete combustion, restoring engine strength and responsiveness.

• Improves fuel efficiency: When injectors operate efficiently, combustion is optimized, reducing excess fuel consumption.

• Smart design (Easy Pour Bottle): Comes with a dedicated long black pouring spout, making it easy to pour the solution into the fuel tank without spills or waste.

• Reduces emissions: Helps lower harmful exhaust emissions thanks to cleaner fuel combustion.

⚙️ Instructions for Use

• Pour the entire bottle into the fuel tank before refueling.

• Dosage: One bottle is sufficient for 60 liters of fuel.

• If the fuel system is heavily contaminated, a second treatment may be required.

• For best results, use the product after every engine oil change.

Step 1: Preparation at the Gas Station

• Drive to the gas station when your fuel tank is nearly empty (red level or about 1/4 tank remaining).

• Turn off the engine and open the fuel cap.

Step 2: Prepare the Solution

• Open the bottle cap (there is usually a silver seal inside; remove this seal).

• Take the included black funnel (attached to the side or cap of the bottle) and screw it tightly onto the bottle opening.

• Note: This funnel helps open the safety latch inside the car’s fuel filler neck and prevents spillage.

Step 3: Pour into the Tank

• Insert the funnel deep into the fuel filler neck.

• Invert the bottle and pour the entire contents into the fuel tank.

  • Dosage: One bottle is typically suitable for a standard 50–70 liter fuel tank (4–7 seat passenger cars). For motorcycles, use only about 1/5 to 1/4 of the bottle depending on tank capacity.

Step 4: Refuel and Operate

• After pouring in the solution, fill the tank completely with gasoline or diesel.

=> The pressure from the fuel pump while filling the tank will help mix the solution evenly throughout the fuel.

• Close the fuel cap and operate the vehicle normally. The solution will automatically clean the injectors while you drive.

📦 Technical Information

• Product name: Noma Fuel Injector Cleaner Solution

• Volume: 300ml

• Origin: USA

• Shelf life: 3 years from the date of manufacture

• Bottle type: Metal can with separate pouring spout

• Ingredients and chemical properties: Polyetheramine, Petroleum Distillates, Polyisobutene Amine, etc.

• Solution type: Liquid

Storage:

• Proper storage instructions:
  1. Temperature: Store in a dry, cool place, away from direct sunlight or high temperatures (above 50°C).
  2. Fire prevention: Keep away from flames, sparks, and flammable materials (as the product contains flammable solvents).
  3. Child safety: Keep out of reach of children and pets.
  4. Seal tightly: If not fully used (rare, as it is typically a single-use product), close the cap tightly to prevent evaporation.

Warranty Policy:

• 7-day one-to-one replacement if the product is damaged or not intact during shipping to the customer.

User Safety Information:

• Do not inhale vapors directly.

• Avoid contact with skin and eyes.

• Do not spray on a person’s face, eyes, or near children.

• Do not use near heat sources, sparks, or open flames.

• Do not smoke while using.

=> User health safety: Non-toxic when used properly – avoid inhalation, ingestion, or contact with eyes.

💡 Notes When Using

To achieve the best results and ensure safety, users should follow these guidelines:

1. Mixing ratio: Pour the entire bottle into the fuel tank. One bottle is typically used for one full tank (approximately 50–70 liters of fuel).

2. Application method: Pour the solution when the fuel tank is nearly empty, then refill with fresh fuel to ensure even mixing.

3. Usage cycle: Recommended after every 3,000–5,000 km to maintain a clean engine.

4. Safety:

   • Avoid direct contact with skin and eyes.

   • If contact with eyes occurs, rinse immediately with clean water and seek medical attention.

   • Do not ingest under any circumstances.